Does a vented soffit meet Building Regulations for roof ventilation?

The moulded slots give a continuous 10mm air gap along the run, which is the equivalent ventilation Approved Document F expects at the eaves of a cold roof. On a shallow pitch or a room-in-roof you may need more, so check the detail for your build.

Do I need vented soffit all the way round?

Not always. Ventilation is needed at the eaves, so vented board usually runs along the two eaves elevations with plain soffit on the gable returns. If the roof already vents through the tiles or a ridge vent, the requirement may differ.

Will Rosewood vented soffit match my existing Eurocell fascia?

Yes. It uses the same Rosewood grained foil as Eurocell Rosewood fascia, capping and trims, so the colour lines up across the elevation.

The Eurocell Rosewood Vented Soffit Board keeps the roof space breathing while carrying a deep, mahogany-toned woodgrain across the underside of the roofline. The moulded slots give a continuous 10mm air gap, which is what Building Regulations expect on a cold roof and what stops condensation forming on the rafters in winter.

Rosewood is the colour most often specified where the windows and doors are already a dark timber shade. Because the finish is a grained foil rather than paint, it holds its tone through years of UK weather, and it will not rot, warp or need cutting back and repainting the way a timber soffit does.

Available in 150mm, 200mm and 300mm widths in 5m lengths, colour-matched to Eurocell Rosewood fascia and trims so the whole elevation reads as one system. Backed by a 10-year guarantee on the foiled surface.

Key Features

✔ Continuous 10mm ventilation moulded into the board
✔ Deep Rosewood grained foil finish
✔ 150mm, 200mm and 300mm widths in 5m lengths
✔ Colour-matched to Eurocell Rosewood fascia and trims
✔ No rot, no warping, no repainting
✔ 10-year guarantee on the foil